Address: 5060 Ritter Rd, Suite C3, Mechanicsburg PA, 17055    Phone: (717) 540-9707  Fax: (717) 545-8529

Suburban Dynaline

The Suburban Dynaline vs Islandaire EZ GS

If you've been on Islandaire's website recently you may have noticed a "side by side" comparison of their EZ GS against Suburban's Dynaline. Unfortunately, their comparison is not a fair one and includes several blatant errors and mistakes. So let's set the record straight about the Suburban Dynaline:

Heat Exchanger: Tubular, aluminized steel. In the 14 years of DL3 Series production, JMH Associates has never had to replace a heat exchanger, not one time.

CO Detector: The Dynaline is available with a built-in CO Detector. As an onboard CO Detector is not required nationwide, we give our customers the option of including this or not.

Construction: There is no true definition of "commercial grade" for PTAC unit construction. But according to various other manufacturer's claims, our 18 and 20 gauge sheet metal would be considered "commercial grade".

Controls: Our 1 control board runs both the heat and cooling cycles. This allows end users who stock parts to spend less on their inventories and allows for easy self-diagnosis of unit issues.

Combustion Operation: Our negative draw-through combustion is the SAFEST design available. The systems allows for NO penetration of exhaust gases back into the room, as no room air is used for combustion. The Dynaline is also wind rated and has been installed in high-rises around the country for decades.

Front Panel: Our front panel includes rounded corners and is shallower than Islandaire's EZ GS, allowing for less protrusion into the room.

Wall Sleeve: Our wall sleeves are available fully assembled AND in a fold out version. Not forcing our end users to take fully assembled wall sleeves saves them dramatically on shipping costs and makes for far easier storage at the jobsite.

Indoor Fans: Our tangential fan has been providing excellent air flow through our available duct kits for almost 15 years.

Condensor Fan: Our design eliminated a slinger wheel by recessing our condenser coil. This eliminates the need for another moving part that creates noise, the slinger wheel, in the unit.

Combustion Intake: Located above the draining weep holes on the rear of the unit, water would need to run uphill and against the required ¼" slope of the units' pan. 

Please contact JMH Associates today at (717) 540-9707 for more information about the Suburban Dynaline - including pricing, availability, information for architects and engineers, and more.

 

The Industry Standard in Gas PTAC's for Almost 30 Years

The Suburban Dynaline 3 Packaged Terminal Air Conditioner (PTAC) combines economical gas heat and high efficiency electric air conditioning for year round savings and comfort. With over 50 years of experience in manufacturing of heating products, Suburban developed and introduced the first gas PTAC 1985.

The Dynaline 3 w/r410a represents the 4th generation of Suburban's original design concept. The standard 42"x16" wall sleeve makes Dynaline 3 the right choice for new construction or replacement of the Islandaire EZ series GS. Suburban uses only the highest quality components, including ultra-reliable compressors and heat exchangers.

Dynaline units are available in both natural gas and LP. Connections can be inside (front gas) or outside (rear gas) the room to better suit specific applications. Each unit is individually controlled so comfort levels can be set for each room or zone. The top-mounted controls provide for High and Low speeds in both heating and cooling modes, plus a fan only mode. The Dynaline 3 is set up to be run by either the unit mounted controls or a wall thermostat. Adjacent room kits are also available for multi-room applications.

JMH Associates has been the manufacturer's representative for the Suburban Dynaline for nearly 30 years. Our units have been installed in senior living facilities, hotels/motels, college dorms, military housing and more. With over 250 projects and more than 15,000 units installed in our territory, JMH Associates is the source for gas fired PTAC's.

Four capacities of the Suburban Dynaline are available, all operating efficiently and economically utilizing R410A refrigerant:

DL3-0712
Provides a cooling capacity of 7,600 BTU/h along with 12,000 BTU/h of rated heating input.
DL3-600x407
DL3-0912
Provides a cooling capacity of 9,500 BTU/h along with 12,000 BTU/h of rated heating input.
DL3-600x407
DL3-1220
Provides a cooling capacity of 11,500 BTU/h along with 18,000 BTU/h of rated heating input.
DL3-600x407
DL3-1622
Provides a cooling capacity of 15,000 BTU/h along with 20,000 BTU/h of rated heating input.
DL3-600x407

 

Please contact JMH Associates today at (717) 540-9707 for more information about the Suburban Dynaline - including pricing, availability, information for architects and engineers, and more.

 

Copyright © JMH Associates, LLC. All Rights Reserved.